Gabion FAQ

Question: Hello, I plan to build a retaining wall area on the edge of the area of gabions. The height of the wall will be 1.5-2 m. Is it possible to put a wall of gabion fence of shells? In such a case, Did it need the concrete foundation between gabion and shells?
 Answer: Yes you can, but you need a reinforced foundation right between the gabion and shells of at least 30 cm. For further advice please contact us: samuel@enzarindustry.com.

Question: What a wire diameter of gabion mats, and what size are mats when loaded into shipping containers?
Answer: The wire gabion structures (gabion mats) used a diameter of 2.4, 2.7, 3.0 mm, depending on project requirements. Structures made of pressed package size 1.5 × 0.7 ×1.0 which is an average of 30 pieces of structures.

Question: From a wire made mattresses Reno, its material, diameter.
Answer: The wire used for mattresses Reno galvanized 245-300 grams of zinc per square meter. m diameter of 2.4 and 2.7 mm, as well as for use in corrosive environments, an additional coating of PVC.

Question: What better to strengthen the bank and a small slope, which is constantly tempted to cave and waves. Is there a reliable technology?
Answer: The technology of using natural stone and gabion mesh products, is considered very reliable. Recommend that you do with shore protection project gabion structures.

Question: Tell, in which cases the use of gabions and mattresses in no net?
Answer: The mesh structures (mattresses) are mainly used to strengthen the embankments and gabions as retaining walls and a variety of vertical reinforcing structures.